Quantcast
Channel: Crunching the Latest 360 Scene News! - 360Crunch Scene News
Viewing all 161 articles
Browse latest View live

Xk3y Firmware v1.25/1.26 released!

$
0
0
Support for the Liteon 1175 (16D5S) drive.

The Team Xk3y is back, and as promised, they've released its Firmware 1.25/1.26 with Liteon 1175 support!


A couple of weeks ago, the X360Key Team announced that they managed to decrypt the Lite-on 16D5S (1175) drive’s FW and that the Xk3y was now able to emulate it.

Now, as promised, they've released the FW update for it...

Quote:

Firmware 1.25 with Liteon 1175 support released!

We have released a firmware with long-anticipated support for the Liteon 1175 (16D5S) drive. Get it at http://www.xk3y.com !
Pretty good news. Get it from their official website or from HERE!

And, finally, here's the official README:

Quote:

xk3y firmware UPDATE v1.25

Instructions:

  1. Extract the three files "rootfs", "uImage" & "xkey.cfg"
  2. Open xkey.cfg with Notepad and configure it if needed.
  3. Add the three files to the root folder of a Flash Drive or HDD. (Make sure to "eject" the drive properly from the PC, it may otherwise cause corrupt files)
  4. Connect the Flash drive or HDD to your xk3y remote and wait for the xk3y to start the update.
  5. The remote OLED will now display "UPDATING - PLEASE WAIT" for about 35 seconds. (Do not turn off your XB360 or disconnect the remote while updating)
  6. Once the update is completed, the OLED will display "UPDATE COMPLETE - RESET XBOX" Reboot your xbox and the xk3y should now be updated to the latest firmware.
  7. That's it! Continue to enjoy using xk3y with the new features!

NOTE! If you use the same drive as you store games on to do the update with, then its recommended (not needed) to remove the "rootfs", "uImage" & "xkey.cfg" from the root of your drive after a firmware update. Since keeping them there will cause the xk3y to check the files if they are a newer firmware version then stored on your xk3y micro SD card, and because of that take longer time for your HDD to be recognized.

New features in 01.25 [30/08/12]

  • Added support for 16d5s fw 1175 (RGH)
  • Added AoE support

* UPDATE!

Version 1.26 was released fixing a nasty bug.

Quote:

  • Fixes bug in 01.25 firmware affecting PHAT consoles

Grab it from --> http://xkeydownloads.com/firmware/01.26.zip

NEWS SOURCE #1: Forums Topic #6444 (via) EurAsia
NEWS SOURCE #2: x360key (via) FaceBook

Our thanks to 'Gauss' for this news item!

FoundMy is having an 'End Of Summer' sale

$
0
0
FoundMy has been around for a while supporting the 'scene' with spare parts, new lasers, drives, and tools needed, and they have decided to have an big 'End Of Summer' sale for all our valued Crunching members to enjoy.


Here is their sales pitch, along with a coupon code to get 15% off, plus FREE SHIPPING to the USA:

Quote:

Hey Crunch community, we need your help. We've been in business for a long time..a really long time. My earliest memory of the scene is from 1998, back when we had dial up modems and were cracking open PS1's. Since then we've accumulated a ton of different products. As we approach the end of the summer, we decided it's time to do some house cleaning!

Want something we have at FoundMy.com but it's not listed here? Use CRUNCHMANIACS for 15% off the entire website.

*Shipping within the US is included FOR FREE via USPS!

Have questions? We have answers. Contact us through PM or email.
FOR MORE INFO, please visit their 'sale thread' in our Buy/Sell/Trade section: --> FoundMy Garage Sale

CR3 Lite now in production!

$
0
0
And with more features!!


Team-Xecuter has shared the 'final' update related to its 'CoolRunner 3 Lite' before shipping.
Final design was shown, its now in production and they also added more features!



Team-Xecuter has shown the 'final' 'CoolRunner 3 Lite' design at its official forums (seen above).

The device is now in production, but that isn't all, as they also added a few nice features before it ships!

Quote:

We spent a few extra days cleaning up the design and making some improvements and implementing suggestions by some scene friends. Also spent some time tweaking the xsvf codes

Here is the final design of the CR3 Lite - More pics to follow showing installs etc.

Production began today so we expect shipping to begin early next week. get your pre-orders in they are selling FAST !

Changes since original version shown last week.....

- Added ROL Pad and 1n4148 Diode (Requested by BioHazard)
- Added DemoN CR_EN Pad (Requested by [cOz]
- Improved Timing Settings
- Cleaned Up Circuit Design
- and....may have fixed Zephyr RGH2. Waiting for more consoles to arrive for testing

Now back to work on the CR3 Pro.......
The CR3 Lite will retail for $34.99 and is expected to go on sale on August 31st.

NEWS SOURCE #1: Forum Thread #91718 (via) Team-Xecuter
NEWS SOURCE #2: CR3 Lite in production with more features (via) DashHacks

Our thanks to 'Gauss' for this news item!

XBLM Browser v1.30 now available

$
0
0
A 'major' update by SKFU.

XBLM Browser is an Xbox 360 LIVE content browser for Windows.
The new version adds a pretty neat 'Dashboard' browsing feature.



XBLM Browser by SKFU, is an Xbox 360 LIVE content browser for Windows. It features XBL network environments (LIVE & PartnerNet), 12 content categories and Content description.

Now, he has released a major update with a new mainfunction, which is used to view the Dashboard in 8 different environments.

Here's the full changelog:

Quote:

Discover more hidden XBL content now, including Microsoft employee-only data.

- Dashboard browsing added
*browse different dashboard views

- 8 Dashboard environments
*Release
*Employee
*Beta Green
*Beta Yellow
*Preview Release
*Preview Employee
*Preview Beta Green
*Preview Beta Yellow

- Custom Partnernet IP possible via settings.txt
Download Links:

- WIN32 - MIRRORS
- OSX - MIRRORS

NEWS SOURCE #1: Downloads #9345 = XBLM_Browser_v1.30_win32 (via) EurAsia
NEWS SOURCE #2: Update-SKFU's XBLM Browser 130 (via) StreetSkaterFu

Our thanks to 'Gauss' for this news item!

NullDC-360 project is back again

$
0
0
Dreamcast on 360

The DreamCast emulator for Xbox 360 emulator development has been resumed


Good news for all the retro-fans out there. One of the best Dreamcast emulators for PC, nullDC has been ported to Xbox 360 and after a long time stucked in development, it has been resumed. According to French developer GliGli:

Quote:

Hey, as you might have noticed, I resumed my work on nulldc-360 and libxenon not long ago.

I’m currently working on 3 things: compatibility/sound/speed.

6 months ago I was badly stuck on 2 bugs, one texture endianess problem, and one random crash/infinite loop in the dynarec.
First thing I did was to look at that texture bug, in a few days I found the exact case where it happened and fixed it for good.
Then I fixed the dynarec one, it was quite an awful one: I forgot to save/restore the SH4 condition flag on dreamcast interruptions, so it was randomly corrupted as the emulated console handled its IRQs!
I fixed a few more bugs until it was clear I needed proper sound emulation for more games to boot.

Adding sound was relatively straightforward, of course there were the usual endianess related bugs, but I guess I’m getting used to it ^^
The Dreamcast sound chip (AICA) is a complex design, it has an ARM processor core, a 64 channel sound generator, and a DSP.
I don’t emulate the DSP for now, many games don’t really need it.
Main problem with sound is the induced emulator slowness, though thanks to the 360 multicore cpu, I was able to make it almost free.

Updating peripherals in the dynarec works that way: each code block knows how many SH4 cpu cycles it emulates, and each time a fixed number of cycles (448) is reached, it calls a procedure that updates those peripherals.
To multithread sound, and by the way, other peripherals, I run parts of that update on a separate core.
It runs concurently with the dynarec, and, basically, every 448 SH4 cycles both get sychronized. so as long as peripherals emulation takes less time than SH4 emulation, the dynarec doesn’t have to wait for them!
So that makes them almost free to emulate, almost because they still stress the 360 L2 cache and memory controller a little.

Anyway, compatibility seems pretty good now, sound works, speed is more or less the same it was before sound emulation, a proper binary release *might* not be that far

NEWS SOURCE #1: Gligli360 (via) Official Site
NEWS SOURCE #2: GliGli (via) GIT Hub

Our thanks to 'Kaos2K' for this news item!

Team-Matrix releases official video of the upcoming 'Freedom' 1175 board replacement!

$
0
0
Finally, backups running on the Liteon 1175 drive!

After the leaked -and confirmed to be real- POC video showing back-ups running on the 1175 drive.
Team-Matrix has decided to make it 'official' and released a new video showing the upcoming 'Freedom'.



Just a couple of days have passed since a POC video showing the Liteon 1175 X360 drive playing backups was leaked into the web, and now Team-Matrix has decided to make it official.

That's right, the team has announced the upcoming 'Freedom' 1175 Board Replacement.

Quote:

Before we begin, some notes regarding the 16D5S drives and why we made the choices that we made :

First of all, the SPI eeprom is locked just like in the old drives and the WP pad is connected to GND, thus making it impossible to erase/rewrite.

Why the old Geremia/kamikaze style method is not feasible in the 16D5S drives :

The area were the WP wire can be cut is less than 1mm in length and the WP bonding wire runs parallel to the DO bonding wire with around 0.1mm of separation between them.

Cutting the WP wire without damaging the DO wire is doable when the chip is decapped and under a good microscope but we can't see any way where someone can do this without some serious lab instruments.

For this reasons we have developed a replacement PCB, similar to our previous Freedom replacement PCB but with some additional hardware needed to cope with the enhanced crypto requirements in the 16D5S firmware.

This PCB will replace the original drive PCB and work on any unmodded Xbox360 (including the 4GB V2 coronas and those with dashboard 15572+ ).

The firmware is finished and stable and has all the features you would expect :

stealth, XGD3, all titles work (basically everything iXtreme 3.0 has) plus some additional features that we are testing and considering for inclusion in the final release.
They also decided to release a 'new' -and also official- video of it:


Quote:

The new video which we quickly threw together first shows a 16D5S drive connected to a corona motherboard (check the marking in the IC and the tracks going to the SATA connector to see that it really is a 16D5S drive).

An original game is already inside (drive is upside down to show the PCB) and it is booted to show that the drive is married to the Xbox motherboard.

The drive is then swapped with another one with the Matrix replacement PCB already installed, and a few backups are booted to show it working on the same motherboard.

Additional videos will be released shortly, but for the moment being our time is better spent in development than in movie making ;-).

This one was mainly done due to the leaked video, to show our drive working without all the programming/debugging hardware that is normally connected to the drives during the development stage.
So, there you go. Stay tuned as things are about to get more exciting in the upcoming months!

OFFICIAL SITE: http://www.infinitymod.com/

EXCLUSIVE: Modchipmaker helping police to do raids on resellers!

$
0
0
A few days ago, we heard rumors of some raids recently in Germany at various resellers of products that enable RGH functions on Microsoft Xbox 360 consoles.

At first we thought it must be Microsoft upset, but it was not clear so we decided to reach out to our friends over there to dig up the real truth, and sadly the story that appeared shocked us completely!

It was not Microsoft that was bringing the trouble and police to their doors, it was an actual long-time scene douche Oscar and his modchip wholesaler outlet Hardstore that have turned from being a manufacturer of RGH-enabling products like Squirt360 to instead helping police knock down the very doors of their own resellers.


Talk about amazing 'scene' drama. So read below, the shocking story of how it all happen from long time trusted reseller ModControl:

Quote:

Hi Gary,

Oscar from Squirt360 Team sends the police to us! Here is the whole story:

Some months ago we are with our store an official reseller from Squirt360 but aren't happy about their announcements and attack against other teams, also the hardware itself had some issues and we have some problems (like our users, I will explain it later) with the Squirt stuff.

After that they told us, that they have some killer features like the DualNAND Mod which was based on Gligi RGH Code which is of course was completely open source. So we are pissed off a little because Squirt/Oscar starts some wars against other teams like Team-Xecuter and Matrix.

So we thought we have to bring the code (VHDL/CPLD) back to the scene with the dualNAND function. This is the reason why we released the RGH_CPLD_MOD v0.1 (without source at first, cause it was crappy) and later after some more tests the new (public) v0.5 with all files included to let devs and users and of course also the teams work with it.

Nothing special for us, nothing special in generally, but enough to let Mr. HardStore aka Mr. Squirt aka Mr. Electronic Mods aka Mr. Argon2 (yep, he is also behind that scene rip off, more about the drama you will find on hackmii.com) go crazy.

After some discussions with him and some descriptions why his Squirt Modchip isn't better for us compared to every other CPLD/RGH solution out there he was pissed off and starts flaming, so we start to ban Squirt360 in our store CodeXecution.Com and blocked Oscar on ModControl.Com.

At this time Squirt BGA 1.2 was out with a locked BGA CPLD Code which was based again on freely available Gligi's work, again with no new big features but with a better DualNAND Code which he announced as a better solution when the floating around of (our code) open source one appeared.

We know that the first code wasn't clean, that is the reason why we didn't release the source files. So we released the v0.5 and v0.5.1 package to the masses to let every TX Cool Runner / Matrix 360 v1Glitcher / and other solutions play with this code which of course is also based on the original RGH code from Gligi.

But of course, the Squirt code didn't reset the SMC, which means, that you aren't safe on Xbox Live. So we talked again about their crappy shit and told our users, that we didn't want to sell or have to support this kind of shit.

Now Oscar/Squirt/ElectronicMod/Hardstore.Com from Italy are pissed-off and announced that he will come back with his lawyer and the police.

Also he send some Samples to our users, 3 of 5 (everything negative result with the samples is still inside our forums, so we didn't need to lie, you know me Gary, I´m a long time scener, so I don't need to lie) so we talked to our users, that we did not support this crap from them.

Some weeks later (3-4 weeks ago) I got raided, thanks to Oscar and his lawyer. This guy really did go to the police.

He announced it twice (look at the quotes here):

Quote:

(10:24:33) Oscar - hardstore.com: hahaha FUCKING STUPID yo uwill close SOON bastard my lawyer is already warning and collecting proofs
(10:24:51) Oscar - hardstore.com: don't worry you find a CRAZY guy that know very well how to do
(10:25:02) Oscar - hardstore.com: you are selling DRM breaking products
(10:25:06) Oscar - hardstore.com: and is ILLEGAL in germany
(10:25:09) Oscar - hardstore.com: even if I stop all germany
(10:25:20) Oscar - hardstore.com: suggestion close ASAP your shop
(10:25:24) Oscar - hardstore.com: and continue your bullshit
(10:25:33) Oscar - hardstore.com: on modcontrol
(10:25:35) Oscar - hardstore.com: only
(10:25:46) Oscar - hardstore.com: if you don't want to be in a fucking process for a while...
(10:25:48) Oscar - hardstore.com: hahahahah
(10:25:51) Oscar - hardstore.com: CIAOOO COGLIONE
And confirmed his move also more then one time to two well known german resellers.

Quote:

(17.04.2012 18:52:06) Oscar - hardstore.com: Forum: Squirt360 = Banned! <<< don't worry all my MONEY, TIME LEFT every day and ALL MY EXPERIENCE will be focus to FUCK your ASS MR. BASTARDO
(17.04.2012 18:52:20) Oscar - hardstore.com: You don't know very well what I can do... and I fuck also if al lgermany will not be able to sell ONE CHIP ... important is FUCK YOU
(17.04.2012 18:52:22) Oscar - hardstore.com: byebye
Yeah, of course, to make a long story short, the Squirt guys went to the police and I got raided.

You know what all this means?

A ModChipmaker and a reseller of such products goes like a rat to the police and starts to sing like a bird to attack this scene (he attacked the scene more when one time with his lies, some devs didn't want to go far away from him cause he is a good guy, they went away from him guys he tries to rip them and our scene, we all still live off).

I do not need to say that these kind of moves are totally without honor and a punch directly into the face to every single onlinestore, coder and hacker, because he tried to force us like Sony did with graf_chokolo or others, he really did the same like our enemies but not like Microsoft or Sony did, his move has everything to not do with a correct fair reaction from an actual respected copyright holder like M$, Sony and Nintendo.

When someone like M$, Sony send the police ok, we didn't want it, but of course we have to deal with it, but when actual Modchipreseller and manufacturer sends the police, what did you think what kind of other shit he will also do?

Two middlefingers up from hitman43 / ModControl.com & CodeXecution.com to the Squirt360 leakers/liars (RGH2, Corona v1) with their shit!

Also greetings to: TX, TMT, XK3Y, COBRA, MAXIMUS and all others, sure, I didn't like every campaign or product from them but hey, I didn't need to buy them, thats exactly the same I told about Squirt but the difference is, non of the others send the police to my house, cause they accept that the fair business way!


Fuck Squirt, a real man does not talk with the police, a real man in the scene business does not work with the police, and a modchipmaker never sends the police to a store, that totally breaks the true scene etiquette and trust.
Our many thanks for 'hitman43' to contact us and give us in-depth story, of this very sad turn of events in the Xbox scene, which you can read more about it from his german forum site here.

NEWS UPDATE: Since the original news story was published, the Squirt Team have contacted us and given their reply to this story:

Quote:

The fantasy in this world is endless!!!

First at all few little notes:

1- Markus wrote PROGSKEET but I think he mean SQUIRT TEAM .
2- Germany is one of the most active country again DRM devices, GaryOPA remembers the GRAF story, but alot of people remember the PS2 and PS3 actions in Germany that gave everyone alot of troubles on many famouse websites (Gamefreax, Freakware, Divineo), etc.

Markus runs one of the largest biggest forum sites 'ModControl' and make tons of modifications for some lucky reason never got a problem before.

Mr. Markus aka HITMAN is well know in germany, is the owner and admin of www.modcontrol.com and many of our customers hate him because he is simply a CRAZY guy.

In the past months a smear campaign was done on www.modcontrol.com again squirt team without any good reason... with personal insults posted public online.

We suggest you just use google GOOGLE LINK HERE and take a bit of time to read all the post from HITMAN43 to understand the person we are talking about.

The "war" again with Squirt was called "BLITZ KRIEG" (check his post HERE).

We sent him an EMAIL to stop writing attacks against Squirt, but he simply ignore our team and we don't have time and time to write posts to defend us, so we threatened legal action against him.

Finally he was caught by police 40 days ago... of course the PARANOID person he is thought that a modchip maker was the guilty partner of this story...

But maybe he forgots he lives in a country that is not BURUNDI but GERMANY and maybe to sell modchips with www.codexecution.com is all safe in Germany... (but it is far from safe)

Everyone is free to think as they wish, but believe me this is only the "poor story of a paranoid man"...

So to summarize:

"SQUIRT TEAM HAS NOTHING TO DO WITH THIS STORY"
So there you have both sides, up to you to decide the truth between the lines from each party. :) -- Stay Tuned for more 'scene' drama! :)

Squirt NAND PCB 512 MBytes for PHAT consoles now available

$
0
0
PLUS: A prototype of QSB DUAL NAND 'CORONA' was shown

Team 360Squirt has released to the market the new SQUIRT NAND PCB 512Mbytes, ready to be used for DUAL NAND and SQUIRT BGA.


If you didn't know, the 360Squirt Team has made available to the market the new SQUIRT NAND PCB 512Mbytes, which is ready to be used for DUAL NAND and SQUIRT BGA on PHAT consoles.

Here's the official info:

Quote:

Is important to understand some important things on PHAT dual nand:

Like you know if you have a console X360 with dashboard above 14699 you should install RGH2.0 and not RGH1.
Right now aren't availables the DUAL NAND bitstreams for RGH2 because simply xilinx chip is full.
We are working to release the DUAL NAND bitstream working with QSB DUAL NAND PHAT tool, in this case the SYNC button / SMC reset function works perfectly.

The options to install NAND 512 PCB are so two:
1- Install the nand pcb with a phisical switch (CE_B and CE_A switch)
2- Wait the release of QSB DUAL NAND PHAT accessory and the correct bitstream RGH2.0 + QSB DUAL NAND.

Here you can find the diagram how to install SQUIRT BGA + NAND 512 Mbytes with a switch. >> CLICK HERE (added also in diagrams collection)

New tutorial PDF is available here

We remember that SQUIRT NAND PCB can work so also with any RGH modchip! soon we will post links to reviews and videos.

Thanks for now
SQUIRT TEAM
Also, the team has released a pic showing a prototype PCB board of QSB DUAL NAND "CORONA", which has been described as an easy quick solder solution for DUAL NAND on CORONA.



Apparently, the boards will be ready soon and PREORDERS are now open.

So, there you go, for more info go to the official 360Squirt website below!

NEWS SOURCE: Squirt 360 (via) Official Site

Our thanks to 'Gauss' for this news item!

J-Runner 0.2 - Build 280 now available!

$
0
0
'The Ultimate JTAG/RGH App'

According to T-X, this is the best JTAG/RGH App out there, and thankfully, it has received an update, adding lots of new features and bug fixes.


J-Runner is, according to Team Xecuter, the best JTAG/RGH App out there.

If you didn't know, J-Runner is a simple all-in-one application that integrates with Xebuild to read/create and write xbox 360 nand images for the reset glitch and Jtag hack. It has been developed with the end user in mind to make the entire process intuitive, simple and seamless from start to finish.

It has been a while since its latest update, but thankfully, a new Build is now available for all us to enjoy.

Here's the changelog for the new Build 280:

Quote:

  • Added Corona Install Images
  • Added DIY Corona xsvf for 48MHZ Osc
  • Added Monitor COM wiring Images
  • Added Enable/Disable of File Checks/Downloads in Settings
  • Added app re-opens in same screen position as was last used
  • Changed Use of registry for settings (values are stored elsewhere)
  • Changed Settings layout
  • Changed Custom Functions layout
  • Changed Xsvf selection screen
  • Fixed Nand init after dash selection
  • Fixed Cpukeydb clipboard after a sort-by selection
  • Fixed RGH auto Selection for Trinity
  • Fixed Small bug in dashlaunch selection radio buttons
  • Fixed Bug where crash occurs if filepath no longer exists for working folder
  • Tidied up Images dropdown menus
  • Added warning of existing files in output folder on start
  • Added fcrt when extracting files
  • Fixed bug in Scan for keys

Download Links:

- J-Runner v02 Beta (280) Core Pack

NEWS SOURCE #1: Forum Thread #82434 (via) Team-Xecuter
NEWS SOURCE #2: J-Runner app build 280 released (via) DashHacks

Our thanks to 'Gauss' for this news item!

Matrix Glitcher V2 Rev.C officially supports Corona V2

$
0
0
New reader now in production.

The Matrix Team has officially announced a NAND dumper which is able to RGH Corona V2.


Team Matrix has announced the production of a new NAND Dumper which will be compatible with the Corona V2.

That's right, the Matrix Glitcher V2 Rev.C will be able to RGH Corona V2.

Here's the official info:

Quote:

A new NAND reader/writer had to be developed to interface to the 4GB Corona motherboard due to the new phison chip and the differences in the communication protocol.

Installation difficulty is about the same as the old Nand SPI reader (even though the pads are slightly closer together, installers will have the choice to use a quick solder board or directly solder wires to the motherboard).

One small note regarding nand dumps : V2 nand dumps don't have ECC bytes (this is by design, since they are stripped by the phison controller which also takes care of blocks remapping and a bunch of other stuff), so scripts that expect them to be present might need to be modified (either that or they need to be added after the nand has been dumped).

The final nand reader software will automatically add/remove ECC bytes to the nand image as to try to preserve compatibility with existing software as much as possible.
It looks like it won't take too long for this one to arrive, so stay tuned!

NEWS SOURCE #1: InfinityMod (via) Official Site
NEWS SOURCE #2: Matrix Gltcher V2 Rev.C is abl -to RGH Corona V2 Matrix Team reads dumps NAND (via) MaxConsole UnderGround

Our thanks to 'Gauss' for this news item!

Team Xecuter announces 4GB USB Reader & Sonus 360

$
0
0
More products are on the way.

Team-Xecuter has announced two new incoming devices:
A QSB addon for the Corona 4GB and one to program a different startup sound to your X360.



That's right, two more devices are coming from Team Xecuter.

First, the Xecuter 4GB USB Reader, which allows you to dump the Corona v2 4GB NAND via USB.

Quote:

We have designed a very simple QSB addon for the Corona 4GB which allows you to directly connect to USB for fast dumping of the Corona v2 4GB NAND.

J-Runner is also being updated to be fully compatible so tools such as win hex will not be required.

Production is moving fast - more details and pictures will be announced shortly along with the price which we will make sure is very cheap.
Also, a pretty neat one: Xecuter Sonus 360, which allows you to program a different startup sound on your console!

Quote:

This has been a pet project for a while now and we've finally got it working on all Xbox 360 slim models (Phat is being done next)

The Xecuter Sonus 360 essentially allows you to program a different startup sound to your Xbox 360 !

This is a really fun tool and you will love it. We'll post more details when we are ready to ship (production has already started)

Requirements:

- Xecuter Sonus 360 (easy to solder)
- J-R Programmer v1 or v2 (new firmware updated will be released)
- J-Runner Software (Upcoming version will include Corona 4GB and Sonus 360 support)

Busy, busy, busy.......
So, stay tuned. It looks like it won't take too long for those to arrive!

NEWS SOURCE #1: Two more products from Team-Xecuter on the way (via) DashHacks
NEWS SOURCE #2: Forum Display #124 (via) Team-Xecuter

Our thanks to 'Gauss' for this news item!

Maximus announces SDTOOL thanks to defeat of the Corona 4G by 'dayton360mods'

$
0
0
Great news this afternoon in the '360 Scene', the lastest Corona board has fallen victim to the RGH2 mod, thanks to all the open forum discussion on the 'dayton360mods', now all boards have been defeated.

And due to this great news, the Maximus team have announced a new tool called SDTOOL that will make following the currently complex tutorial much easier for everyone!


Quote:

After days of discussion on the dayton360mods forums, we have pasted all the relevant information and developed a set of software tools (sdtool) that will allow you to boot RGH2 on your Corona 4G board today !!

The tools will make the process very simple and you dont have to mess with Winhex nor nandpro nor ecc data conversion, the sdtools does it all. Please note we are not taking credit for the procedure, we only take the steps and make software tools to make it easy and clear (at least is what we think).

Edson Dario has made a Step by Step tutorial. Please note this tutorial is rated C, only for those modders who know what they do, if you dont feel confortable reading then you can wait till other people do a more noob friendly tutorial.

Many thanks to c0z for the guidance. And all other folks over dayton360mods.
Juggahax0r at Dayton360MoDs, Team Squirt, Zhangjiqi007, Zhaojun297,
Glitch360Team, Edson Dario, carranzafp, collions, Sileandro, nice69,c0z(joebloma)

On another topic but related, we are producing our own version of the SD-Nand programmer, we will call it the Maximus SDTOOL to match our software tool name. And hell will be cheap too !!. We will post pictures very very soon.

So stay tuned for more news from Team Maximus in regard to their new SD-Nand programmer called SDTOOL and grab the attached tutorial below :)

NEWS SOURCE: BREAKING !! Sept , 2012: FULL RGH2 Running on Corona 4G (All boards defeated !!) VIA (360NandFlasher)
Attached Files

xeBuild 1.05 BETA now available!

$
0
0
Now with support for Corona 4g

The xeBuild team have released an Beta update for their NAND Builder featuring support for Corona v2 (4g).


The team behind xeBuild have posted a new BETA version of their NAND BUILDER, mainly adding Corona v2 (4g) support (but also features other additions).

Keep in mind that, the output message still says 1.04 because it's not yet the final version of v1.05

Here's the changelog:

Quote:

xeBuild 1.04 (535 beta)

Greetz to carranzafp aka Maximus for attempting to confuse everyone.

*note this is not fully tested on consoles (especially non-corona4g) but appears to be a solid update anyway*

Changes:


1.05 (1.04 beta)
- tidy ini_creator output a little
- colons were not being removed from macid string in ini file, fixed
- added corona4g build target and dump parsing, nanddump.bin should be minimum 0×3000000 bytes from corona mmc machines (no spare data)
- Xstress.settings will now be kept along with other mobile data
- added flash header sanity checks
You can download this BETA version from HERE!

NEWS SOURCE: Xebuild 1.05 beta Corona 4G support added (via) Homebrew-Connection

Our thanks to 'Gauss' for this news item!

AutoGG 0.7 beta (024) released

$
0
0
Now with support for xeBuild 1.05 beta (Corona v2)

blaKCat is back with another update for his AutoGG tool, bringing support for the Beta xebuild 1.05 (Corona 4g)


Spanish developer blaKCat has released an update for his AiO (Nandpro/xebuild/build.py...) RGH/JTAG app: AutoGG

This version features xeBuild v1.05 Beta support (Corona 4g), among tons of other changes and additions.

Here's the full changelog for AutoGG 0.7 beta (024):

Quote:

- Corona V2 Ready. Read/Write/load Nand to show extract Nand Data/.Build NandXell to get CPukey and Corona v2 Xebuild .
Sd Reader Needed.
- New Freestyle Dash 2.2.1072
- New svf to program Chips for dualnands Corona Squirt
- New mode to get Cpukey without LAN(with flasher)
- New Lite Mode. Autogg Version more friendly with only needed functions for exploit.
- New Auto-Update Button. Update your Rgh to latest Dash in only ONE-CLICK
- New Auto-Update function. Make your RGH in One
-Click with Flasher.
- Added Librasoft Usb Cable Option to Program Chips.
- New ECC Checksum to Check all pages of Nand.
- New Dump Fast Search, select your Nands Folder Autogg will search your vailds Xbox Dumps, creating quick open Menu.
With Recent FIles function, and Serial Search.
- Now when you read Nand it will be Auto-Saved in your selected "Nands FOlder\backups",
once decrypted it will create a folder in your nands folder (named with Serial) and will
save there Dummp and all important Data.
- Now you can build/repair a Xebuild Image without NandDump (only Cpukey, Optional: SMC,SMC Config, Keyvault,Ldv,BadBlocks).
- Now you can build NandXell without any Data in Rgh1. You need only CB for RGH2 nandxell.
- Logs AutoSave
- You can write Xsvf and svf with any flasher (LPT,Nandpro,Squirt,Librasoft)
- New Schematics (pics) Viewer
- Available Online Database to save/recover your Cpukey (giving Id or Serial)
- New Dialogs
- New Auto Functions.
- Added Status Bar.
- Graphic changes.
Be sure to download the newest version from HERE!


NEWS SOURCE #1: AutoGG 0.7 beta024 Xebuild 1.05 beta support added (via) Homebrew-Connection
NEWS SOURCE #2: AutoGG by blakcat tutorial exploit rgh jtag (via) Elotrolado

Our thanks to 'Gauss' for this news item!

Files released to allow Xbox Live with JTAG/RGH consoles!

$
0
0
Since the moment Microsoft added Xbox Live to their console, there been a grey market between those wishing to mod their consoles, and those wishing to still be online at the same time. Of course Microsoft has been very protected in this area, always updating, adding ways to find modded consoles and banning them from the network.

It makes sense its an paid service and they want only legit owners on it, so its always been an cat & mouse game since day 1 of the Xbox console.


Now, recently there been alot of moment in the Xbox 360 field with the 'Glitch'ing' chips allowing even the most recent model of the Corona v2 motherboard found inside the newest Xbox 360 Slim consoles to be what is called RGH'ed, but of course Xbox Live was out of the picture, now suddenly the files that allow you to get around any current blockades and protection put inplace by M$ have appeared on the underground 'net, of course with no source.

Quote:

Off-Site Download Link: --> http://www.mediafire.com/?b8ojiusu46rs4

Includes:

XeLive, Xbdm.xex, Launch.ini Files:

Tutorial:
1. Place the folder at the root of your hard drive.
2. Use my launch.ini and xbdm.xex and put on root of hard drive, not in the XeLive folder.

The launch.ini has all features that need to be enabled/disabled as well as all plugins, and an xbdm.xex that allows memory edit, connected to xbox neighborhood, and will also help with connection. This will allow connection to live, thus removing DNS errors.

Common Questions
1) Can't connect, DNS errors?
Use the files I have provided, it will remove liveblock, and has all plugins needed to run the files.

2) Asking to update?
You may be on 15574, but you may not have the recent updates. If that is the case, you are good to update your console. If you do not have 15574, use Swizzy's Tool to apply dashlaunch, and update to 15574. This is the safe way of doing it. This should fix that error.

WARNING: Unplug your external hard drive or usb when you update dash. When you update your dash it unformats your enternal HDD. If you do not, you will lose all files on it!!
First off, I don't recommend trying this file replacement, whom knows what could happen to your box or action taken by M$ against your Live account.

DO SO AT YOUR OWN RISK!

Second, there is no source, and why should there be, anyone that developed this patch would be scare to put there name to it! :)

Third, it has been confirmed to work by various forum members from the site linked below, but again if you wish to try it, that is all up to you.

NEWS SOURCE: http://www.xbox360iso.com/jtag-relea...s-t623445.html <-- Note you have to be forum member to view it!

Our thanks to 'rednekcowboy' and '2615863' for the news tip!

New Xecuter Sonus 360 pictures shown

$
0
0
Program a different startup sound on your X360

Team Xecuter has shared pics of the upcoming Sonus 360.
Price, install, use and shipping date to be revealed soon.



As we informed you Team Xecuter announced new products a few days ago.

One of them is the 'Xecuter Sonus', which basically allows you to program a different startup sound to your Xbox 360!

Now, they've shared some pics from the device.

Quote:

The JR-Programmer is shown with the speed upgrade PCB and the speaker is an optional extra for those who don't have LE (Limited Edition) consoles with just the crappy buzzer.

More info regarding price, install, use, shipping dates very soon.

Here is a glimpse of the new Sonus 360 Editor tool that is built into the upcoming new version of the J-Runner App.

No JTAG Hack or RGH Hack is required to use this tool - Custom Startup sounds on stock machines
Here's a bigger pic:



And, if you haven't seen it yet, here's a pic of the Sonus 360 Editor tool:



So, there you go. Stay tuned for more detailed info about this one in the upcoming days!

NEWS SOURCE: Xecuter Sonus 360 pictures (via) Team-Xecuter

Our thanks to 'Gauss' for this news item!

J-Runner v0.2 Beta Build 282 now available

$
0
0
'The Ultimate JTAG/RGH App'

The AiO JTAG/RGH app has been updated, adding full support for Xebuild 1.05 and Corona 4GB.


If you didn't know, J-Runner is a simple All-in-One application that integrates with Xebuild to read/create and write Xbox 360 NAND images for the RG and JTAG hacks.

Just a few days after the release of Build 280, the team behind this neat app is back with another update, this time adding full support for xeBuild v1.05 and Corona 4GB.

Here's the changelog since that release:

Quote:

Build 282

- Allows full dump of Corona 4GB to work with xebuild

Build 281

- Added Xebuild 1.05
- Added read/write to Corona 4GB using SD Card reader
- Full Corona 4GB support
For more info and download links, go to the official J-Runner thread below!

NEWS SOURCE: Forum Thread #82434 (via) Team-Xecuter

Our thanks to 'Gauss' for this news item!

New Progskeet (v1.2) to be released soon...

$
0
0
The flasher gets a complete overhaul.

Devs behind ProgSkeet just announced a new version of their hardware, featuring 'dual NAND/NOR support on different consoles'.


A new version of ProgSkeet, the universal NAND/NOR Flash programmer, is coming.

v1.2 will feature support for DUAL NOR / NAND on different consoles. Also, they've moved from CLIPS to QSB Boards for more stability.

And, its coming very soon: it will be released next month or earlier!

Here's the official info:

Quote:

Dear Customers,

PROGSKEET V1.2 is in production, release: first week of October (maybe early)

Here some infos in preview:
1- Redesign of main board now more small and stable (4 layers)
2- Slave baord with USB, LED, SWITCH (for memory banks selection)
3- FCC cable 15 pins that allow to connect externally the slave board
4- Bus SPI on FCC cable for future expansions
5- 100% support of WINSKEET
6- DLL OPEN library to allow integration in other alternative programs
7- 1 Mbit SPI FLASH memory on board

The package content:
1x PROGSKEET V1.2 + SLAVE BOARD
1x ADAPTOR PCB PROGSKEET

The main improve of the new PROGSKEET V1.2 solution will be the support of DUAL NOR / NAND on different consoles.
NOR and NAND CLIPS are not anymore official supported, we decide to move on QSB BOARDS, more cheaper and sure more stable then CLIPS. Soon news also about these accessories.


More infos about specs of new WINSKEET and SOFTWARE will be posted soon.

PREORDERS of the first limited production are open!
Contact us!
So, stay tuned for it. Get more info on the official ProgSkeet website below!

NEWS SOURCE #1: Forum Topic #3964 (via) ProgSkeet
NEWS SOURCE #2: New Improved ProgSkeet Coming (via) PSX-Scene

Our thanks to 'Gauss' and '2615863' for this news item!

Another new product from Team-Xecuter: 'DemoN Corona QSB'

$
0
0
QSB upgrade for the DemoN Slim.

T-X has announced a new incoming product, the 'DemoN Corona QSB', an easy upgrade solution for Xecuter DemoN owners.


Team-Xecuter has announced a new product.

The upcoming DemoN Corona QSB is an easy upgrade solution for DemoN Slim owners. This one will require 12 points of soldering for 6 wires (apart from the needed for the DemoN).

Here's the official info:

Quote:

Rather than release a new DemoN version just for the Corona we have made a QSB upgrade for the DemoN Slim which makes a Corona install much easier.

The DemoN Corona QSB will be available to buy from all resellers next week.
(Bigger Pic Attached Below)

Thankfully, it won't take too long for it to be released, so stay tuned for it!

NEWS SOURCE #1: Forum Thread #92426 (via) Team-Xecuter
NEWS SOURCE #2: Heres another product from Team-Xecuter (via) DashHacks

Our thanks to 'Gauss' for this news item!
Attached Images

360 HackBox Lite v2.0.12.233 released

$
0
0
All-in-One JTAG/RGH application

nknave has updated his AiO tool for installation and modification of your Xbox 360 and now includes full Corona v2 support!


360 HackBox Lite by nknave, is an all in one tool for installation and modification of the Xbox 360, and its compatible with JTAG/RGH Hack (1, 2).

The new v2.0.12.233 now features full Corona v2 support and adds an SD Reader/Flasher, which is based on Swizzy's Tool.

Here's the full changelog:

Quote:

v2.0.12.233 ( Almost Final )

- Added SD Reader/Flasher based on Swizzy's Tool
- Added tasks support for Corora v2 4G NAND (ecc and xebuild)
- Modified the interface section a little to list available removeable devices
This is to choose your Corona v2 NAND mounted as SD Card
- Added a Device Refresh Button to list the partitions available when you reconect the SD Reader
- Modified the launch.ini editor to allow fixed settings from multiple choice in the future
- Added xeBuild 1.04.535 to build Corona v2 Freeboot images
- Added show DVD Key and SecData Offse in Other_Info tab when creating FreeBoot image
- Fixed a bug in the CPU Key obtain from Xell code
- Light esthetic changes
- Includes a beta demo of "Video-Tutorials" which streams directly from you YouTube.
- Currently only videos in spanish
- You may find it at Menu > Tools > Video-Tutorials Online
VIDEO-TUTORIALS (Beta) screenshot:



You can download the newest version from HERE!

NEWS SOURCE #1: Downloads #9388 = 360_HackBox_Lite_v2.0.12.233 (via) EurAsia
NEWS SOURCE #2: Forum Topic #6667 (via) EurAsia

Our thanks to 'Gauss' for this news item!
Viewing all 161 articles
Browse latest View live